Have Questions or Need an Estimate?  Call  941-786-1437 se habla español

Excellence in Custom Glass Shower Doors

0

You have no items in your shopping cart.


Shower Hardware

Grid List 

Set Descending Direction
  1. 1
  2. 2
  3. 3
  4. 4
  1. 135 Degree Glass To Glass Clamp

    Material: Solid Brass
    Glass Thickness 3/8” (10 mm)
    Hole Diameter Required: 3/4” (19 mm)
    Includes: Mounting Screws and Gaskets.

    Read More

    ADD TO CART

  2. Square Heavy-Duty Fixed Panel U-Clamp

    Material: Solid Brass
    Glass Thickness: 3/8” to 1/2” (10 to 12 mm)
    Finger notch Required: 3/4” (19 mm)
    Includes: Mounting Screws and Gaskets.

    Read More

    ADD TO CART

  3. Square Heavy-Duty 90° Glass to Glass Clamp

    Material: Solid Brass
    Glass Thickness: 3/8” to 1/2” (10 to 12 mm)
    Hole Diameter Required: 3/4” (19 mm)
    Includes: Mounting Screws and Gaskets.

    Read More

    ADD TO CART

  4. Square Back-to- Back Pull Handle – 6″

    Material: 3/4” (19mm) Tubular Brass
    Glass Thickness: 1/4” (6 mm) to 1/2” (12 mm)
    Hole Diameter Required: 1/2” (12 mm)

    Read More

    ADD TO CART

  5. Square 180 degree glass-to-glass clamp

    Material: Solid Brass
    Glass Thickness: 3/8” (10mm) to 1/2” (12mm)
    Hole Diameter Required: 3/4” (19 mm)

    Read More

    ADD TO CART

  6. Shower Door Header Kit 98”

    Will provide additional support and a level of safety while securing glass panels of 3/8” or 1/2” not reaching the ceiling.
    Each Header Kit Contains:
    – 98” Header Extrusion
    – Snap-In Filler for Door Pocket
    – Vinyl for 3/8” (10 mm) Glass, not needed for 1/2” (12 mm) Glass.

    Read More

    ADD TO CART

  7. Rounded Shelf Clamp

    Material: Solid Brass
    Glass Thickness: 3/8” (10 mm)
    No Holes Required on glass.

    Read More

    ADD TO CART

  8. Ladder Back-to- Back Pull Handle – 8″

    Material: 3/4” (19mm) Tubular Brass
    Glass Thickness: 1/4” (6 mm) to 1/2” (12 mm)
    Hole Diameter Required: 1/2” (12 mm)

    Read More

    ADD TO CART

  9. Heavy-Duty Square Wall Mount Bracket

    Material: Solid Brass
    Glass Thickness: 3/8” (10mm) to 1/2” (12mm)
    Hole Diameter Required: 3/4” (19 mm)
    Includes: Gaskets & mounting screws
    Can be used as a horizontal shelf bracket

    Read More

    ADD TO CART

  10. Square Pivot Hinge

    Material: Solid Brass
    Glass Thickness: 3/8” (10 mm)
    Can be mounted floor and ceiling, or floor and header.
    Hinge Swings: Full Rotation with Self-Centering
    Includes: Gaskets, Screws, and Cut-out templates

    Using two hinges hold up to 100 lbs. with a max. width of 31”

    Read More

    ADD TO CART

Grid List 

Set Descending Direction
  1. 1
  2. 2
  3. 3
  4. 4